Not logged in

Forums

Replies created

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 506 total)
  • in reply to: SQ4 early preview #203881 |
    Karish
    Customer
    571 Posts

    sorry to keep you waiting, we are still working on new Beta 8. 100% reliable backtests between SQ4 and MT4 are our main goal, we will not release it until we achieved it. We are fixing some last issues, and we will start internal testing next week. We will release it once it passes the tests, for sure before the end of this month, possibly much sooner. But as I said before, Beta 8 should be first really usable Beta version with reliable backtests, so we have to make sure it really works 100%.

     

    Yes!!!, thank you so much!, very happy to hear that!,

    • Mark would AZ-INVEST plugins work 100.00% with SQ4 also? + would pending orders work with his plugins and not only market orders?

    • would we get BarOpen Method in SQ4?

    • would SQ4 show us the Equity Curve also and not only the Balance Curve?

    in reply to: SQ4 early preview #203819
    Karish
    Customer
    571 Posts

    The thing is the latest beta 7, got it all,

    i tested it few times for few hours,

    yes not everything is working and some features are missing,

    but i think there are priorities that should be followed,

    there are so many features and the new platform is so full of stuff you can now even adjust the inside of the building blocks and shit :),

     

    though the most important thing is left behind for some reason,

    we must have fully reliable backtests between SQ4 and MT4 before everything else,

    other platforms that are out there are fully in sync with the platforms they building for,

    i wont give out names but most of us know them already,

    so 100.00% backtest sync between SQ4 and MT4 is a MUST!, and everything else around it later,

     

    AZ-INVEST plugins should also work with SQ4,
    because SQ3 wont show the same results in MT4, and not even with AZ-INVEST plugins, even with standard charts SQ3 rarely shows the same results,

    i dare somebody to show me the same results with a strategy built in SQ3 with WIN% lower then 30%~25%, it is IMPOSSIBLE!

     

    please do something…!, its 2018, cant remember when all that talk about SQ4 even started, 2015?

    in reply to: SQ4 early preview #203763
    Karish
    Customer
    571 Posts

    I’m sorry, but I think most of us have different priorities during the holidays. We’ll release new Beta in the beginning of January, we have to make sure all the remaining major issues are working.

     

    Reliable backtests between SQ4 and MT4 please is an ABSOLUTE MUST!

    thats the main thing before everything else, any news about the new beta?

    we are so tired waiting….,

    i think that the next beta should have Reliable backtests between SQ4 and MT4 in 100.00%

    and then the other updates will contain other less critical stuff…

    *BTW Equity calculations should be added into the calculations not only Balance calculations

    Karish
    Customer
    571 Posts

    thanks karish for this tool…can you explain how to install?

    The installation is simple:

    Drop the folders from the .rar file into your SQ’s “code” folder, an example would be:  “C:\SQ Instances\SQ\code”

    replace the old files with the new files

    *there is no closure/restarting of any open SQ instances that are running needed.

    Enjoy.

    Karish
    Customer
    571 Posts

    Version 2.0 (29.12.17):

    • * Another bug with the “ThisBarOpen” building block, using this building block causes inaccurate results between SQ&MT4.
      do not use this building block until further notice.
    • * Minor bug was fixed.

    —————————

    DOWNLOAD LINK:

    https://drive.google.com/file/d/18hrH6z0-RlRtN_d_uNsMW6zJEbtULR1G/view

    • This reply was modified 2 weeks, 5 days ago by Karish Karish.
    Karish
    Customer
    571 Posts

    It is like the calculation of ATR,

    it is the ratio value between the upper and the lower BB,

    if the market going sideways the BB is always calming down and acting like a channel,

    but its when the breakout happens and the BB are getting wide all of a sudden and thats what its all about,

    with BBWidthRatio just like with ATR you can measure the markets volatility.

    Karish
    Customer
    571 Posts

    :), thank you

    Karish
    Customer
    571 Posts

    i load over 5000 strs into QA4,
    i set the max strs in a portfolio to 100,

     

    i have a snippet for fitness that i already built and its working great, (attached to my last post..),

    what i am trying to achieve is to add to my already working snippet 2 more fitness functions but this time rather to Maximize i want to them to be working on Minimization.

    I want to add up those 2 functions:

    Minimize DrawDown in % + Minimize DrawDown in $,

    +

    Minimize Stagnation in % + Minimize Stagnation in Days.

     

    thats all, if i have those 2 examples added to the snippet in a very simple lay-out way..,

    Thank you for your time.

    Karish
    Customer
    571 Posts

    Could we somehow construct my snippet into one that will be a Maximize + Minimize ready?,

    Maximize already working, we need to somehow manage to add the minimization functions to be easy and simple to edit and add more,

     

    this will help us all im sure

    Karish
    Customer
    571 Posts

    Still very very hard to understand…,

    see my snippet where i maximize things,

    i want to add to this same snippet some minimize features like minimize drawdown and minimize stagnation for example..

    please could you somehow help me with this? is there a way to make the code more understandable like mine just with the addition of the minimization of some functions?, see the txt file attached….

    • This reply was modified 3 weeks, 5 days ago by Karish Karish.
    Attachments:
    You must be logged in to view attached files.
    Karish
    Customer
    571 Posts

    Thanks @notch,

    But this is not that understandable..,

    could you please make this snippet with this example:

    Maximize Constitutive  Losses & Minimize Constitutive  Wins

    +

    Minimize Stagnation & Minimize Drawdown

    +

    Maximize RetDD

     

    this way i will understand how to add / edit the things i want to it, thank you so much for your help!

    Karish
    Customer
    571 Posts

    Version 1.9 (21.12.17):

    • * Order management loops ware updated again, the loops ware not working as they should be.
    • * Discovered a bug by default in the original code, some strategies not calculating the open price of the order in the right way,
       i will try to fix it in the future, but it is something to do with only the “TodayOpen” building block,
       do not use this building block until further notice.

     

    —————————

    DOWNLOAD LINK:
    https://drive.google.com/file/d/1oA_-4q0NiEIvPDJChMGVQkQrOtQXOL5L/view

    • This reply was modified 4 weeks ago by Karish Karish.
    Karish
    Customer
    571 Posts

    Version 1.8 (19.12.17):

    • * Order management loops ware updated and a bug with order not retrying correctly when flooding the broker’s server.
    • * Few more very minor bugs ware fixed.

    —————————

    DOWNLOAD LINK:

    https://drive.google.com/file/d/1FFCoLKFWdxpvGtgFoWDipm1Bu63Vb2gE/view

    • This reply was modified 4 weeks, 1 day ago by Karish Karish.
    • This reply was modified 4 weeks, 1 day ago by Karish Karish.
    • This reply was modified 4 weeks, 1 day ago by Karish Karish.
Viewing 15 posts - 1 through 15 (of 506 total)