Reduce Ram consumption?
4件の返信
こんにちは,
I just changed PC, and moved to 32 gb ram. I’ lm surprised to see that when I just open SWX, just open, no action, it already consumes 6,5 GB of Ram. That s huge and unexpected, because on my previous PC with just 8gb the idle SQX only occupied 2 GB ram, and I don’t see why it should be higher now. It s a huge impact to have 20% of Ram just consumed by the software, particularly for intensive tests.
am I doing anything wrong? Is there anything I can do to reduce RAM usage from the software itself?
thank you!!
0
こんにちは、,
SQ allocates RAM according to memory settings and also databank content affects that.
You can set the memory allocation manually using SQX -> Configuration -> Memory and experiment with the setting
0
トーマスさん、こんにちは,
thank you for your reply. Clear to me on what consumes RAM. I allocate 31 GB out of 32 available, I use this pc only for StrategyQuantX. What I don’t understand is why right at the start the app already occupies 6,5 Gb, while it used to occupy 2 on my former PC with 8 GB right. Cannot believe the “idle” consumption is proportional to the available RAM, wouldn’t understand why.
I have quite a few databanks created, due to couple of custom projects, but they are all empty, as I clean them up regularly, and by the way this high consumption was already existing before I loaded my custom projects.
Does it clarify? Anything I can consider to reduce initial ram consumptions? 6.5 Gb is 20% of available Ram, it’s really a lot particularly in light of intensive tests like Params Permuation.
Thank you again!
0
トーマスさん、こんにちは,
thank you for your reply. Clear to me on what consumes RAM. I allocate 31 GB out of 32 available, I use this pc only for StrategyQuantX. What I don’t understand is why right at the start the app already occupies 6,5 Gb, while it used to occupy 2 on my former PC with 8 GB right. Cannot believe the “idle” consumption is proportional to the available RAM, wouldn’t understand why.
I have quite a few databanks created, due to couple of custom projects, but they are all empty, as I clean them up regularly, and by the way this high consumption was already existing before I loaded my custom projects.
Does it clarify? Anything I can consider to reduce initial ram consumptions? 6.5 Gb is 20% of available Ram, it’s really a lot particularly in light of intensive tests like Params Permuation.
Thank you again!
0
Hi Tomas, thank you for your reply. Clear to me on what consumes RAM. I allocate 31 GB out of 32 available, I use this pc only for StrategyQuantX. What I don’t understand is why right at the start the app already occupies 6,5 Gb, while it used to occupy 2 on my former PC with 8 GB right. Cannot believe the “idle” consumption is proportional to the available RAM, wouldn’t understand why. I have quite a few databanks created, due to couple of custom projects, but they are all empty, as I clean them up regularly, and by the way this high consumption was already existing before I loaded my custom projects. Does it clarify? Anything I can consider to reduce initial ram consumptions? 6.5 Gb is 20% of available Ram, it’s really a lot particularly in light of intensive tests like Params Permuation. Thank you again!
It can depend on how many projects you have on SQX and how many strategies you have in the databanks. Try cleaning up and see if the situation improves
0
4件の返信を表示中 - 1 - 4件目 (全4件中)