MONEY MANAGEMENT CALCULATION ERROR
13件の返信
ルネット
11年前 #113539
Hello Mark I’â„¢m Riccardo from Sapienza Finanziaria
I would notice you that in my opinion EAW has a bugs in the calculation of the Money Management Risk with Fixed% of account equity.
On the trading system that I’m planning I fixed a risk per trade of 1%
Try looking for example what happens in the trade # 79 which I highlight in the attached image.

Before the #79 trade in my account I have a balance of 21680 USD, and I set a Risk per Trade 1%.
It means I could lose about 217 USD if I get the SL.
The trade # 79 is a BUY operation with Entry price at 1.3703 and SL at 1.3640.
The operation goes to market with 3:40 lots, so each pip is 34 USD .
The transaction closes with a 1241 pips loss (= 63 x 34).
Actually to respect a Risk per Trade of 1%, the trading system should have open that trade with 0.34 lots and not 3.40 lots.
I’m a MQL programmer so I tried to correct the EAW sqMMFixedRisk function replacing it with a my own function that I report here below in order to help you to solve the bug:
//------ sqMMFixedRisk fixed by Riccardo
double sqMMFixedRisk (int orderMagicNumber, int orderType)
{
double LotSize=0;
double _riskInPercent = RiskPercent;
double _maximumLots = 5.0;
double slSize = sqMMGetOrderStopLossDistance(orderMagicNumber, orderType) * gPointPow;
double riskPerTrade=AccountBalance() *(_riskInPercent/100);
if(slSize <= 0) {
Verbose("Computing Money Management - Incorrect StopLossPips size, it must be above 0");
return(0);
}
Verbose("Risk per trade: ", riskPerTrade);
Verbose("Computing Money Management - SL: ", slSize, ", Account Balance: ", AccountBalance(),", Tick value: ", MarketInfo(Symbol(), MODE_TICKVALUE),", Point: ", MarketInfo(Symbol(), MODE_POINT), ", Lot size: ", MarketInfo(Symbol(), MODE_LOTSIZE),", Tick size: ", MarketInfo(Symbol(), MODE_TICKSIZE));
double TickValue=MarketInfo(Symbol(),MODE_TICKVALUE);
if(Digits == 1 || Digits == 3 || Digits == 5) {
slSize = 10 * slSize; // conversion from pips to points
}
if(slSize>0 && TickValue>0)
{
LotSize = MarketInfo(Symbol(),MODE_TICKSIZE) * riskPerTrade / (slSize * TickValue * MarketInfo(Symbol(),MODE_POINT) );
int err=GetLastError();
if(err==4013)
{ //ERR_ZERO_DIVIDE
Verbose("Err: division by zero: StopLoss:",slSize," TickValue:",TickValue," LotSize:",LotSize);
return(-1);
}
}
//--- MAXLOT and MINLOT management
double Smallest_Lot = MarketInfo(Symbol(), MODE_MINLOT);
double Largest_Lot = MarketInfo(Symbol(), MODE_MAXLOT);
if (LotSize < Smallest_Lot) LotSize = Smallest_Lot;
if (LotSize > Largest_Lot) LotSize = Largest_Lot;
if(LotSize > _maximumLots) {
LotSize = _maximumLots;
}
//--------------------------------------------
//--- LotSize rounded regarding Broker LOTSTEP
if(MarketInfo(Symbol(),MODE_LOTSTEP)==1)
{
LotSize=NormalizeDouble(LotSize,0);
}
if(MarketInfo(Symbol(),MODE_LOTSTEP)==0.1)
{
LotSize=NormalizeDouble(LotSize,1);
}
if(MarketInfo(Symbol(),MODE_LOTSTEP)==0.01)
{
LotSize=NormalizeDouble(LotSize,2);
}
if(MarketInfo(Symbol(),MODE_LOTSTEP)==0.001)
{
LotSize=NormalizeDouble(LotSize,3);
}
//--------------------------------------------
return (LotSize);
}
//--------------------------------------------------------------------
Using that function it is also possible to avoid to set the Lots Decimal そして、 Base Currency Exch Rate MM parameters that will become ininfluent.
0
リカルド
Thanks for this, But I have a number of questions
1. Which part of the EAW code needs to be deleted
2. Do any new variables need to be declared for you code to work
Thankyou 🙂
0
ルネット
11年前 #130005
1. You have only to replace the sqMMFixedRisk function with the code I post.
2. You don’t need to declare any additional variable (take in account that with my function the Lots Decimal そして、 Base Currency Exch Rate Ea Wizard Money Management parameters become ininfluent)
0
Hello Riccardo,
sorry it takes me too long to respond. I already looked at your function and tested it, but it is quite different from our own function and I haven’t had time to test it thoroughly in all environments, including trading of CFDs etc., which is different than forex.
I’d like to get to it any day, I’m just too busy with unexpected things all the time.
マーク
StrategyQuantアーキテクト
0
ルネット
11年前 #130020
Thanks Marc,
I use it basically on Forex trading.
I compared the calculation between the original function and the modified one.
Original function give me a strange behaviour in lot calculation : in some cases it seems don’t taking in account the risk percent I fixed.
If you want I can send you an example the backtest results obtained using both the functions.
0
Riccardo,
Thanks for your reply and explanation – as Mark has now replied I will wait for him to finish his testing – thanks again
0
I tested it and all seems to be working correctly, so I just released an EA Wizard autoupdate that contains Money Management fix from Riccardo.
マーク
StrategyQuantアーキテクト
0
Can I ask that if when using this feature I enter 0 in % risk, then the function will use the value entered in “lots if no MM” ?
0
Risk in % field value is required to be greater then zero i.e. 0.1, 1 etc.
0
I tried using the Risk in % and no matter what I try, whatever percent I put in the field (i.e., 1,20,.06. .3, etc) that is the exact fixed lot size that gets traded. It isn’t varying the lot size at all.. It is not defaulting to Lots if no MM or anything like that and I have the stoploss for risk to be calculated. Is this a bug that anyone else has experienced lately? I have the latest update as well.
0
Hi Marc and Tomas,
This looks like the closest thread to what I am experiencing.
MM to fixed % of equity is set as well as Global Stop Loss. All trades are set to use these settings.
In the TEster in MT4, all lot sizes are defaulting to 0.01 Lots on EURUSD.
Attached is the code I’m using. Please let me know if you can see anything.
I’m using MT4 Build 840
Thanks and regards
Tim
0
こんにちは,
Not sure either this is the right place to post this remark, but I guess also there is an error in StrategyQuant (v3.8.1) Lot calculation:
Line 14 : if(MathMod(lotMM*100, lotStep*100) > 0) {
should be
if(MathMod(lotMM1*100, lotStep*100) > 0) {
double computeMMFromRiskPerTrade(double riskPerTrade, double slSize) {
if(slSize 0) {
lotMM = lotMM1 - MathMod(lotMM1, lotStep);
} else {
lotMM = lotMM1;
}
lotMM = NormalizeDouble( lotMM, LotsDecimals);
if(MarketInfo(Symbol(), MODE_LOTSIZE)==10000.0) lotMM=lotMM*10.0 ;
lotMM=NormalizeDouble(lotMM,LotsDecimals);
//Log("Computing lots, risk: ", riskPerTrade, ", lotMM1: ", lotMM1, ", lotStep: ", lotStep, ", lots: ", lotMM);
double Smallest_Lot = MarketInfo(Symbol(), MODE_MINLOT);
double Largest_Lot = MarketInfo(Symbol(), MODE_MAXLOT);
if (lotMM Largest_Lot) lotMM = Largest_Lot;
if(lotMM > MaximumLots) {
lotMM = MaximumLots;
}
//Log("SL size: ", slSize, ", LotMM: ", lotMM);
return (lotMM);
}
よろしくお願いいたします。,
och
0
Hello Olivier,
you are right, there is this mistake. I’ll release an update tomorrow with a fix.
マーク
StrategyQuantアーキテクト
0
13件の返信を表示中 - 1 - 13件目 (全13件中)