クロスチェック:フィルター:オリジナルの % 時点でのモンテカルロ方式
6件の返信
In Zdenek’s ebook/course, one of the retest method/filters he suggests using is:
“Delete all strategies where the Ret/DD% is less than half (.50%) the original at 95% confidence”
I understand how to configure the Monte Carlo test but I can’t seem to figure out how to set the Filtering for it in SQX. The “Left” value let’s me configure “50% of Ret/DD Ratio (Monte Carlo retest methods, Conf. level 95%) but what should the “operator” be and what should the “Right value” be since this is a computed value?
For example, let’s assume the Original Ret/DD ratio is 6.8. Half of this value (50%) is 3.4. So the filter should look for a value of at least 3.4 at the 95% confidence level.
What is the proper way to configure this filter for this MC retest?
よろしくお願いします。.
0
こんにちは、,
Attached is my way of doing it, including settings of the right-side value. (This is for trades manipulation, but it’s exactly the same for retest methods)
Small opinion though, if I may: I noticed I ended up losing many high quality strategies that are doing well on my incubation demo accounts, when I apply this rule strictly as shown. In my point of view, looking from a robustness perspective, if a strategy has a very high original ret/dd, and survived vigorous tests such as the strategy parameters manipulation, do you real care that it’s let’s say 5 ret/dd ratio at 95%, for a 13 ret/dd (original) strategy?
The SQ X robustness & Filtering abilities are brilliant, but some filtering should still be done manually, in my eyes.
イリヤ
0
Thank you Ilya. Very good point regarding the application of this rule. I’ll certainly give it some consideration. I appreciate the help.
アーロン
0
The step by step guide to set up the filter can be found here, starting at slide 48. Looks identical to the settings Ilya posted, but walks you through it
http://www.appdemostore.com/demo?id=4814939983183872
0
Thank you Ash24FX. I’ll take a look at it.
0
the 50% filtering could be translated also as follows – expect in the future minimum 50% performance as what you see in the backtest
if i have strategy with RDD 10, MC RDD 6 – i have 60%, so i can live with the assumption of 50% in the future
but if i filter RDD 20, MC RDD 8 – i have only 40%, but in the meaning of the value of MC RDD i get better strategy, by i move the expectation of the strategy in the future. So its hard to say what will be the expectation.
利益を上げるアルゴトレーダーになりたいですか?私たちは2014年序盤からStrateQuantソフトウェアを使い始めました。現在では、あらゆるタイプの市場に対応するEA構築に関する膨大なノウハウを持っています。私たちはこのノウハウ、アプリ、ツール、そしてすべての最終的な戦略をリアル・トレーダーの皆様と共有しています。参加したい方は、以下にご記入ください フォーム.
0
do you real care that it’s let’s say 5 ret/dd ratio at 95%, for a 13 ret/dd (original) strategy? The SQ X robustness & Filtering abilities are brilliant, but some filtering should still be done manually, in my eyes. Ilya
I agree!
the 50% filtering could be translated also as follows – expect in the future minimum 50% performance as what you see in the backtest if i have strategy with RDD 10, MC RDD 6 – i have 60%, so i can live with the assumption of 50% in the future but if i filter RDD 20, MC RDD 8 – i have only 40%, but in the meaning of the value of MC RDD i get better strategy, by i move the expectation of the strategy in the future. So its hard to say what will be the expectation.
I love the 50% for robustness and expectation testing and filtering too! The 95%-99% I use it only for lot size calculations and other worse case calculations. For instance, with excellent everything else but an ugly 95-99%, no need to turf it, just use smaller risk size.
0
6件の返信を表示中 - 1 - 6件目 (全6件中)