Moving Average Levels
5 replies
TJ#
11 years ago #113676
Where do I find this “Moving Average Levels” parameter in EA Wizard? See attach screenshot for detail.
Thanks
0
Tomas Matejka
11 years ago #130281
Levels for Moving Average do not have any meaning since MA is usually shown on a price chart. Those levels are commonly used with oscillators for example like -100 or +100 levels on Commodity Channel Index (CCI) or Relative Strength (RSI) etc.
0
TJ#
11 years ago #130286
I needed them for my MTF codes…
0
TJ#
11 years ago #130287
With the MA levels I can plot my SL or even the entry easily…
In fact, I can use “MA + no. of pips” to create the same effect but I will likely to add errors to my codes due to “my poor programming” skill.. 🙁
0
Tomas Matejka
11 years ago #130295
There’s also an indicator called “Envelopes” … it can provide you two values: MA + upper offset and MA – lower offset. Offset is set as a percent deviation from MA.
You can add one “Envelopes” with the same MA period setting as you have set your MA and add required % deviation from MA with “output value set to Upper” and another with “output value set to Lower” using same MA and deviation settings
0
TJ#
11 years ago #130312
Thanks. 🙂
0
Viewing 5 replies - 1 through 5 (of 5 total)