Question about customer project: filter for system parameter permutation
3 replies
Diwi
4 years ago #279931
Hello,
I have added the ‘Automatic Retest’ task to the customer project. Under Cross Checks I have Sys. parameters permutation selected. Here I use the default settings of the Cross Check Settings. In the Ranking tab, I only want to filter out and delete the strategies for Ret/DD Ratio where the
% Orig./Median is > +100% and
% Orig./Median is < 50%.
Can someone please tell me what I have to enter under Ranking for Left and Right Values so that the above condition is met?
0
Diwi
4 years ago #280011
It would also help me if I could set this filter to filter out the Rret/DD ratio frequency that differs by more than 50% from the median value, which according to the documentation must be = 0. The value = 0% cannot be entered in the filter:
% Orig./Median is > +150% and
% Orig./Median is < 50%.
How do you create the filter?
0
Tomas Matejka
3 years ago #280115
Hi,
what you need can be set by using multiple filters + percentage ratio. See the picture attached
0
Diwi
3 years ago #280151
Thank you, that works.
0
Viewing 3 replies - 1 through 3 (of 3 total)